Soluble Cutting Oil Additives / Metalworking Fluid Additives / Lubricant Additives / Multi Base Oil - SCOL 8218
Soluble Cutting Oil Additives / Metalworking Fluid Additives ( Multi Base Oil )
Soluble Cutting Oil as per IS 1115 For Metalworking Fluids Purpose
"SCOL 8218" is a water-soluble cutting oil Emulsifier package, which base on surfactant, sulphonate Amide, Ester base chemistry.
"SCOL 8218" have inbuilt Biocide which take care of bacterial growth.
"SCOL 8218" have inbuilt Defoamer which take care of foaming properties.
"SCOL 8218" is high performance package which work with Group I & Group II mineral Base oil.
"SCOL 8218" covers Aniline point range from 95 ℃ to 115 ℃.
Key Performance
-
Excellent Corrosion Protection
-
Self-Emulsification
-
Biodegradable
-
Excellent Hard water stability
-
Cost Effective
-
Satisfies IS 1115 requirement
-
Good performance in Group I & Group II Mineral base oil
Other Technical Information
Typical Properties
• Color : Amber to Dark Brown
• Appearance : Viscous Liquid
• Acid value : Max 10. MgKoH/gm
• Amine value : Max 70. MgKoH/gm
• PH 5% in Distilled water : Min 9.5
• Oil solubility 18 % in Group I & Group II : Bright & clear
• Thermal stability at 50 ℃ : No separation
Guideline Formulations
| Raw Material | Formulation 1 | Formulation 2 | Formulation 3 | Formulation 4 | Formulation 5 |
|---|---|---|---|---|---|
| SCOL 8218 | 18% | 18% | 18% | 18% | 18% |
| SN 150 GRI | 82% | - | - | - | - |
| N 150 GRII | - | 82% | - | - | - |
| SN 70 GRI | - | - | 82% | - | - |
| N 70 GRII | - | - | - | 82% | - |
| Transformer Oil | - | - | - | - | 82% |
| Total | 100% | 100% | 100% | 100% | 100% |
Result of Cutting Oil
| Properties | Formulation 1 | Formulation 2 | Formulation 3 | Formulation 4 | Formulation 5 |
|---|---|---|---|---|---|
| Emulsion stability in ratio 20:1 & 5:1 At 400ppm Hard water (IS 1115 P:98) | Passes | Passes | Passes | Passes | Passes |
| Cast iron Test in ratio 20:1 At 400 ppm Hard water (IS 1115 Appendix A) | Passes | Passes | Passes | Passes | Passes |
| Frothing test in ration 20:1& 5:1 in 200 ppm Hard water (IS 1115 P:99) | Passes | Passes | Passes | Passes | Passes |
| Thermal stability at 50 ℃ (IS 1115 P:100) | Passes | Passes | Passes | Passes | Passes |
| Stability test at 4℃ | Passes | Passes | Passes | Passes | Passes |
| Emulsion Colour | Milky white | Milky white | Milky white | Milky white | Milky white |
Dosing
• 18% to 20%
Storage Condition
• Store inside warehouse, Temperature condition 10℃ to 35℃
• Avoid water collecting on barrel top
Shelf Life
• 6 month Form Date of manufacturing
Pack Size
• 50 kgs HDPE Carboy, 200kgs HDPE Drums
- Soluble Cutting Oil Additives / Metalworking Fluid Additives ( Multi Base Oil ) - SCOL 8218
- Soluble Cutting Oil Additives / Metalworking Fluid Additives ( Group I Base Oil ) - SCOL PI-8218
- Soluble Cutting Oil Additives / Metalworking Fluid Additives ( Group II Base Oil ) - SCOL PII-8218
- Soluble Cutting Oil Additives / Metalworking Fluid Additives ( Naphthenic Base Oil ) - SCOL N-8218
-
- +91 - 98224 29911 / 9822 799911